We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0

Jaw Boring Rings, Universal Lathe Spindle & Collet Stops, CNC Lathe Stops

N-200A SERIES 3 JAW CHUCKS
CNC Hydraulic Power Chucks
  • STRONG Chucks are interchangeable with industry standard 1.5mm x 60° serration chucks
  • Approx. 20% higher speed, higher gripping force and larger bore compared with usual chucks
  • Manufactured from high grade alloy steel
  • All sliding surfaces are hardened and ground for accuracy and repeatability
  • Chucks include all mounting hardware
Run-Out Problems? It May Be Time To Replace Your Chuck!
*Kitagawa is a registered trademark of Kitagawa NorthTech.
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Chuck
Size
Chuck
Model
Chuck
Dia.
Thru-hole
Dia.
Spindle
Mount
Part
Number
Chuck Cross
Reference
6" N206 6.654" 1.772" A2-4

A2-5
K-206A04-N-B

K-206A05-N-B
B206,

ATL6,HS-06
8" N208 8.268" 2.047" A2-5

A2-6
K-208A05-N-B

K-208A06-N-B
B208,

ATL8,HS-08
10" N210 10.000" 2.953" A2-6

A2-8
K-210A06-N-B

K-210A08-N-B
B210,

ATL10,HS-10
12" N212 11.969" 3.585" A2-6

A2-8
K-212A06-N-B

K-212A08-N-B
B212,

ATL12,HS-12

JAW BORING RINGS
No need to look all over the shop for a setup piece and waste time. Our jaw boring ring is essential for boring soft jaws and round jaws.
FEATURES:
  • Ideal for machining soft jaws.
  • Attaches quickly without tools.
  • Applies equal pressure on all jaws.
  • Attaches to front of jaws, compensating for "jaw lift."
  • Since no discs or bungs are used to clamp jaws, through boring of jaws is possible.
Save Set-Up Time!
Jaw Boring Ring (comes complete with 3 pin assemblies)
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Chuck
Dia
ID
Inch
OD
Inch
Pin
Depth
Pin
Dia
Part
Number
6"

8"

10"

12"

15"
3.250

3.500

5.900

7.475

8.900
6.825

8.450

10.150

12.075

15.230
0.350"

0.350"

0.350"

0.400"

0.600"
0.512"

0.562"

0.709"

0.709"

0.938"
JBR-06

JBR-08


JBR-10


JBR-12


JBR-15

UNIVERSAL LATHE SPINDLE & COLLET STOPS
For CNC, Manual Lathes & Indexing Heads
  • Completely self-centering
  • Installs in seconds!
  • Greater rigidity insures duplication
  • Cannot vibrate or change position once it is locked
  • Rejections cut to a minimum
Fully Adjustable To Fit A Wide Variety Of Applications!
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
A B C Spindle
Size
Part
Number
12-1/4"

19"

21-1/2"

22-1/4"
4-1/2"

6-7/16"

7-7/8"

9-1/4"
6"

6-1/2"

10-1/2"

10-1/2"
1" - 1-1/4"

1-5/16" - 1-11/16"

1-3/4" - 2-7/16"

2-1/2" - 3-1/2"
ALOR-S1

ALOR-S2


ALOR-S3


ALOR-S4



DIGIT COUNTER MICROMETERS
  • Digital counter
  • Resolution: .0001" (using vernier)
  • Microfine graduations on satin chrome
  • Carbide tipped measuring faces
  • Positive locking nut on spindle
  • Sizes over 1" include standard
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Range Part
Number
0-1"

1-2"

2-3"

3-4"
FOW-A52-224-001

FOW-A52-224-002


FOW-A52-224-003


FOW-A52-224-004



DIGITAL CALIPERS
  • Direct inch/metric conversion.
  • Resolution:.0005"/.01mm
  • Large easy-to-read LCD display.
  • Includes shop hardened case.
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Range Accuracy Part
Number
0—6"

0—8"

0—12"
.001"/.02mm

.0015"/.03mm

.0015"/.03mm
FOW-A54-1000002

FOW-A54-1000082


FOW-A54-1001122
Replacement Battery FOW-A54-100-350
CNC LATHE STOPS
  • Ensures accuracy/repeatability within .0005"
  • Heavy duty and highly accurate
  • Replaces inaccurate and expensive stopping mechanisms
  • Precise, easy to use and inexpensive stop for CNC lathes
The Accu-Stop Assembly is constructed of low carbon steel coated with zinc oxide for lasting strength and durability. The faceplate of the assembly mounts to the front of a draw tube style manual or power chuck, while the extension tubes extend back into the draw tube to accommodate work pieces of any length. The Accu-Stop bolts to the front of the chuck, allowing your work piece and the stop to turn together, eliminating friction damage. Easily pays for itself in just a few jobs by eliminating the time it takes to use the turret to locate your work piece!
Assembly Includes:
Face Plate, Sub Face Plate, Three Extension Tubes, End Cap, Lock Nut and Threaded Adjustment Rod
PACKAGE INCLUDES:
Complete Assembly, Accu-Stop Special Vise & Strap Wrench
ORDERING INFORMATION:
Please have the following available when placing order:
  1. Make/Model of lathe
  2. Date manufactured
  3. Make/Model of chuck
  4. Inside diameter of the draw tube.
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Chuck
Size
Description Part
Number
6" Assembly 16.5" AS-1000
Package - Deluxe AS-P1000
Extra Tube (5" Long) AS-1003
Tubing stop option* AS-TSO1000
8" Assembly 16.5" AS-2000
Package - Deluxe AS-P2000
Extra Tube (5" Long) AS-2003
Tubing stop option* AS-TSO2000
10" Assembly 16.5" AS-3000
Package - Deluxe AS-P3000
Extra Tube (5" Long) AS-3003
Tubing stop option* AS-TSO3000
12" Assembly 20.25" (under 3" dia drawtube) AS-4000SB
Assembly 20.25" (under 3" dia drawtube) AS-4000LB
Package - Deluxe (under 3" dia drawtube) AS-P4000SB
Package - Deluxe (over 3" dia drawtube) AS-P4000LB
Extra Tube (6" Long) AS-4003SB
Tubing stop option* AS-TSO4000

POWER CHUCK LUBRICANT
FEATURES:
  • Double to Triple Clamping Pressure.
  • Keeps Work Piece Clamped in Place.
  • Provides Boundary Lubrication Protection.
  • Lowers Friction and Wear.
  • Assists in Wear-In of New Chucks
  • Lowers Maintenance Costs.
  • High Resistance to Centrifuge Force.
For Best Results, Grease Your Chuck Once Per Shift!
The More You Buy, The More You SAVE!
To order any of these items enter the Part Number into the search bar above. (This will take you to the product page where you can add the item to the shopping cart)
Container
Size
Case
Qty
Part
Number
4 Oz Cartridge 24 EZ-21471
4 Oz Cartridge w/ grease gun each EZ-OKIT-21471
16 Oz Cartridge 12 EZ-21478
10 Lb Pail each EZ-21444
40 Lb Pail each EZ-21445
135 Lb Keg each EZ-21446
450 Lb Drum each EZ-21448