Machinery - Machines - Lathes - Geared Head - (360 Products)
Electronic Variable Speed Lathe - #1760EL 17'' Swing; 60'' Between Centers; 7.5HP; 220V Motor
Item #: RA601760EL
Manufacturer: Acer
Mfg #: 1760G
Technical Specifications:
•Brand Name: Acer
•Center Taper: 4MT
•Cross slide travel: 8-5/8
•Distance Between Centers: 60
•Inch Pitch Threads: (36) 4-56 TPI
•Metric Pitch Threads: (22) .5-7mm
•Model Number: 1760EL
•Motor: 7.5HP, 220V
•Spindle Hole Diameter: 2-1/4
•Spindle Speeds: 25-2200 RPM (Infinite)
•Spindle Type: D1-6
•Swing: 17
•Swing over crosslide: 9-5/8
•Swing over gap: 26
•Tailstock Taper: 4MT
•Weight: 3950 lbs
Description:
•Accept both single phase and three phase power
•Low maintenance and down time cost due to fewer gears in headstock
•Constant Surface Speed (optional)
•Electronic and mechanical brake for fast spin spindle stops internal threading
•No RPM gear changer break down, accurate reading on RPM to prolong tool life
•Spindle speed could be adjusted to best condition during cutting
•Save energy cost up to 35%
•17" Models are also available in 40" and 80" Center Distance
•1 Year Warranty Parts
•F.O.B. ANAHEIM, CA
•Standard Equipment:•1440:6" 3-Jaw chuck, 8" 4-Jaw chuck, steady and follow rest, halogen worklight, toolbox, 4-way tool post, 10" face plate, splash guard and micrometer work stop
•1760:10" 3-Jaw chuck, 4-way tool post, steady rest, halogen worklight, chuck guard, splash guard, 14" face plate & 3-Jaw and 4-Jaw adapter plate
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 3950.0000
•An additional $300.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Colchester Geared Head Lathe - #8044VS 15-3/4'' Swing; 50'' Between Centers; 10HP, 3HP, 460V Motor
Item #: RF588044VS4
Manufacturer: Clausing
Mfg #: 8044VSJ-4
Technical Specifications:
•Brand Name: Clausing
•Center Taper: 4MT
•Cross slide travel: 9.8
•Distance Between Centers: 50
•Inch Pitch Threads: (56) 2-56 TPI
•Metric Pitch Threads: (51) .2-14mm
•Model Number: 8044VS
•Motor: 10HP, 460V, 3PH
•Spindle Hole Diameter: 2-1/8
•Spindle Speeds: 14-2500 RPM
•Spindle Type: D1-6
•Swing: 15-3/4
•Swing over crosslide: 9.75
•Swing over gap: 23
•Tailstock Taper: 5MT
•Trade Name: Colchester
•Weight: 3300 lbs
Description:
•Features: Powerful 10 HP AC variable spindle drive motor State-of-the-art AC inverter variable speed spindle drive Three headstock gear ranges offer a wide range of constant power - 33 to 1 Infinitely variable spindle speeds, select the right spindle speed quickly Full rear splash guard and leadscrew cover Leadscrew reversing box for faster thread cutting, reverse leadscrew with spindle turning Extra wide heavy-duty cast iron bed
•Spindle bore 2.12
•Top slide travel 5.1
•Tailstock quill travel 5.5
•Tailstock quill diameter 2.87
•F.O.B. Kalamazoo, MI
•Limited Distribution Area
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 3300.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12x36 EVS Lathe 12" Swing; 36" Between centers; 6-3/4" Cross slide Travel; 1-9/16"Spindle bore; D1-4 Spindle mount; Variable 40-2200RPM spindle speeds; 2HP 230V 1PH Motor CSA/UL Certified
Item #: RB21892000
Manufacturer: Jet
Mfg #: 892000
Technical Specifications:
•Brand Name: Jet
•Center Taper: 5MT
•Cross slide travel: 6-3/4
•Distance Between Centers: 36
•Floor Space Required: 71 x 30 x 60
•Model Number: E-1236VS
•Motor: 2 HP, 230V, 1PH
•Spindle Hole Diameter: 1-9/16
•Spindle Speeds: 0-2000
•Spindle Type: D1-4
•Swing: 12
•Swing over crosslide: 7-5/16
•Swing over gap: 17-1/2
•Tailstock Taper: 3MT
•Trade Name: Elite
•Weight: 1212 lbs
Description:
•Electromagnetic assisted foot brake
•Inverter drive system
•Chuck guards
•Front facing chip pan
•Two speed gearbox
•Hardened and ground gears in headstock
•Fully lit with CNC style lighting
•Overload clutch at feed shaft
•Certified Meehanite® castings
•Integrated locking tool cabinet in stand
•LED RPM readout
•CSA/UL electrics
•3 Year Warranty
•F.O.B. LAVERGNE, TN
•Standard Equipment:•6" 3-Jaw chuck
•10" Faceplate
•Steady rest - ball bearing
•Follow rest - ball bearing
•4-Way tool post
•4-Position carriage stop
•Chuck guard
•Micro-carriage bed stop
•Threading dial
•Coolant system
•Center sleeve
•Dead center
•Level pads
•Tool box with tools
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 1212.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
GHB-1340A With ACU-RITE 200S DRO and Taper Attachment
Item #: PY60321123
Manufacturer: Jet
Mfg #: 321123
Technical Specifications:
•Brand Name: Jet
•Carriage Travel (in.): 35
•Compound Slide Travel (in.): 2-11/16
•Cross slide travel: 6-5/16
•Description: Jet GHB-1340A Lathe with Acu-Rite 200S
•Distance Between Centers: 40
•Follow Rest Capacity (in.): 2-3/8
•Inch Pitch Threads: (38) 3-1/2-80 TPI
•Included Readout: ACU-RITE 200S
•Length of Gap (in.): 8
•Max. Tool Size (in.): 5/8 x 5/8
•Metric Pitch Threads: (23) .45-10
•Model Number: GHB-1340A
•Motor: 2HP, 230V, 1PH
•Overall Dimensions: 79 x 28-1/2 x 30
•Range of Cross Feeds (IPR): .0006 - .0130
•Range of Longitudinal Feeds (IPR): .0018 - .0374
•Spindle Bore (in.): 1-3/8
•Spindle Speeds: (8) 70-2000 RPM
•Spindle Type: D1-4
•Steady Rest Capacity (in.): 2-3/4
•Style: Bench - Geared Head
•Swing: 13
•Swing over crosslide: 7-25/32
•Swing over gap: 18-3/4
•Tailstock Spindle Travel (in.): 3-3/4
•Tailstock Taper: 3MT
•Weight: 1154 lbs
•Width of Bed (in.): 7-3/8
Description:
•JET geared head bench lathes feature an enclosed gearbox for smooth, quiet operation
•Precision roller bearings support the hardened and ground spindle resulting in tight tolerances
•One of the most popular JET lathes now comes with an enclosed gear box
•Enclosed gear box design provides smooth, quiet operation
•Fast, easy speed changes
•Hardened and ground gears are featured in the headstock and gearbox
•D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
•Headstock is constantly oiled during operation
•Gear box gives wide inch threading and feed capabilities with no gear changes
•V-way bed design is induction hardened and ground
•Gap bed section provided for larger diameter work
•Independent leadscrew and feed rod
•2 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 1215.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
22480A 22" x 80" Gear Head Toolroom Lathe; (12) 35-1250 RPM Spindle Speeds; D1-8 Spindle; Spindle Hole Dia. 4-1/8"; 15HP 220/440volt/3ph
Item #: PY8022480A
Manufacturer: Summit
Mfg #: 22480A
Technical Specifications:
•Brand Name: Summit
•Cross slide travel: 14-3/4
•Distance Between Centers: 80
•Inch Pitch Threads: (36) 2-28 TPI
•Metric Pitch Threads: (65) .08-14mm
•Model Number: 22480
•Motor: 15HP, 230/460V, 3PH
•Spindle Hole Diameter: 4-1/8
•Spindle Speeds: (12) 35-1250 RPM
•Spindle Type: D1-8
•Swing: 22
•Swing over crosslide: 12-1/2
•Swing over gap: 32
•Tailstock Taper: 5MT
•Weight: 7150 lbs
Description:
•Heavy ribbed cast bed and base
•Hardened and precision ground extra wide bedways
•Forced lubrication to the headstock carriage and bedways
•Electric brake
•Chuck guard with interlock
•Diametral and module thread capability
•Inch/Metric threading
•Removable gap
•Feed reversing on the apron
•T-Slotted compound
•Dual headstock and apron spindle control levers
•Full length splash guard
•Two speed tailstock
•1 Year Warranty on Parts & Labor - 6 Months on all Electrical
•F.O.B. OKLAHOMA CITY, OK
•Standard Equipment:•Thread dial, carriage stop
•Steady rest with rollers, follow rest
•Coolant system, Halogen work light
•12" 3-Jaw chuck
•Taper attachment
•4 Way rapid traverse
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 7150.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21x120 Geared Head Lathe with Newall DP700 DRO and Taper Attachment
Item #: RB21892662
Manufacturer: Jet
Mfg #: 892662
Technical Specifications:
•Brand Name: Jet
•Center Taper: 7MT
•Cross slide travel: 10-2/3
•Distance Between Centers: 120
•Floor Space Required: 182 x 44 x 68
•Model Number: EGH-21120
•Motor: 12-1/2 HP, 230/460V, 3PH
•Spindle Hole Diameter: 3-1/8
•Spindle Speeds: 20-1600
•Spindle Type: D1-8
•Swing: 21
•Swing over crosslide: 14
•Swing over gap: 31-1/9
•Tailstock Taper: 5MT
•Trade Name: Elite
•Weight: 8,157 lbs
Description:
•Fully lit with CNC-style lighting, the enclosed full length splash guard
•Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004"
•Hardened and ground gears in headstock
•Turcite-B coating between bed and carriage
•One-shot lubrication in carriage
•Overload clutch at fee shaft prevents the carriage from crashing into the chuck
•Shear pin in the lead screw disengages the feed when overloading, preventing damage to the apron and headstock
•Hardened and ground bed ways
•Front facing chip pan
•Certified Meehanite castings
•Newall DP700 DRO and Taper attachement included installed
•CSA/UL electrics
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 8157.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
GHB-1340A With ACU-RITE 200S DRO
Item #: PY60321122
Manufacturer: Jet
Mfg #: 321122
Technical Specifications:
•Brand Name: Jet
•Carriage Travel (in.): 35
•Compound Slide Travel (in.): 2-11/16
•Cross slide travel: 6-5/16
•Description: GHB1340A Lathe W-Acu-Rite 2-Axis DRO(TEXT)
•Distance Between Centers: 40
•Follow Rest Capacity (in.): 2-3/4
•Inch Pitch Threads: (38) 3-1/2-80 TPI
•Included Readout: ACU-RITE 200S
•Length of Gap (in.): 8
•Max. Tool Size (in.): 5/8 x 5/8
•Metric Pitch Threads: (23) .45-10
•Model Number: GHB-1340A
•Motor: 2HP, 230V, 1PH
•Overall Dimensions: 79 x 28-1/2 x 30
•Range of Cross Feeds (IPR): .0006 - .0130
•Range of Longitudinal Feeds (IPR): .0018 - .0374
•Spindle Bore (in.): 1-3/8
•Spindle Speeds: (8) 70-2000 RPM
•Spindle Type: D1-4
•Steady Rest Capacity (in.): 2-3/4
•Style: Bench - Geared Head
•Swing: 13
•Swing over crosslide: 7-25/32
•Swing over gap: 18-3/4
•Tailstock Spindle Travel (in.): 3-3/4
•Tailstock Taper: 3MT
•Weight: 1154 lbs
•Width of Bed (in.): 7-3/8
Description:
•JET geared head bench lathes feature an enclosed gearbox for smooth, quiet operation
•Precision roller bearings support the hardened and ground spindle resulting in tight tolerances
•One of the most popular JET lathes now comes with an enclosed gear box
•Enclosed gear box design provides smooth, quiet operation
•Fast, easy speed changes
•Hardened and ground gears are featured in the headstock and gearbox
•D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
•Headstock is constantly oiled during operation
•Gear box gives wide inch threading and feed capabilities with no gear changes
•V-way bed design is induction hardened and ground
•Gap bed section provided for larger diameter work
•Independent leadscrew and feed rod
•2 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 1215.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Elite Taper Attachment for EGH-1740 and EGH-1760 Lathes
Item #: RB21892157
Manufacturer: Jet
Mfg #: 892157
Technical Specifications:
•Brand Name: Jet
Description:
Shipping Info:
•Actual Weight - 50.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Geared Head Lathe - #D29120G 29-1/8'' Swing; 120'' Between Centers; 15HP; 220V Motor
Item #: RA6029120G
Manufacturer: Acer
Mfg #: D29120G
Technical Specifications:
•Brand Name: Acer
•Center Taper: 5MT
•Cross slide travel: 18-1/4
•Distance Between Centers: 120
•Inch Pitch Threads: (45) 2-56 TPI
•Metric Pitch Threads: (30) .5-14mm
•Model Number: 29120G
•Motor: 15HP, 220/440V, 3PH
•Spindle Hole Diameter: 4-1/8
•Spindle Speeds: (12) 25-1200 RPM
•Spindle Type: D1-11
•Swing: 29-1/8
•Swing over crosslide: 20-1/2
•Swing over gap: 37-25/32
•Tailstock Taper: 5MT
•Weight: 9190 lbs
Description:
•15 HP Single speed motor for 3 Phase 60 HZ wiring
•Hardened and ground meehanite casting bedway
•Hardened and ground gears and spindle; A/B Switches with CE standard
•12 Spindle speeds 25 - 1,200 RPM
•Head stock with magnetic clutch & electric brake
•D1-11 Camlock with 4-1/8" spindle bore
•Rapid crossfeed & carriage traverse
•Standard Accessories:•20" D1-11 4-Jaw Chuck
•One Steady Rest (3.1 - 9.5" Long Tip / 7.8 - 14.5" Short Tip)
•4-Way Tool Post
•Halogen Work Light
•12" Adaptor Plate
•Chuck Guard with Emergency Stop
•16" Drive Plate
•20" Face Plate
•Longitudinal Carriage Stop
•Micrometer Stop
•Built-In Coolant System
•Followable Splash Guard (34" Wide) (60", 80" with Full Length Splash Guard)
•Tool Box with Tools
•Follow Rest
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 9190.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21x80 Geared Head Lathe with Taper Attachment and Collet Closer
Item #: RB21892632
Manufacturer: Jet
Mfg #: 892632
Technical Specifications:
•Brand Name: Jet
•Center Taper: 7MT
•Cross slide travel: 10-2/3
•Distance Between Centers: 80
•Floor Space Required: 139 x 44 x 68
•Model Number: EGH-2180
•Motor: 12-1/2 HP, 230/460V, 3PH
•Spindle Hole Diameter: 3-1/8
•Spindle Speeds: 20-1600
•Spindle Type: D1-8
•Swing: 21
•Swing over crosslide: 14
•Swing over gap: 31-1/9
•Tailstock Taper: 5MT
•Trade Name: Elite
•Weight: 6,613 lbs
Description:
•Fully lit with CNC-style lighting, the enclosed full length splash guard
•Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004"
•Hardened and ground gears in headstock
•Turcite-B coating between bed and carriage
•One-shot lubrication in carriage
•Overload clutch at fee shaft prevents the carriage from crashing into the chuck
•Shear pin in the lead screw disengages the feed when overloading, preventing damage to the apron and headstock
•Hardened and ground bed ways
•Front facing chip pan
•Certified Meehanite castings
•Taper attachement and Collet closer included installed
•CSA/UL electrics
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 6613.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
22460A 22" x 60" Gear Head Toolroom Lathe; (12) 35-1250 RPM Spindle Speeds; D1-8 Spindle; Spindle Hole Dia. 4-1/8"; 15HP 220/440volt/3ph
Item #: PY8022460A
Manufacturer: Summit
Mfg #: 22460A
Technical Specifications:
•Brand Name: Summit
•Cross slide travel: 14-3/4
•Distance Between Centers: 60
•Inch Pitch Threads: (36) 2-28 TPI
•Metric Pitch Threads: (65) .08-14mm
•Model Number: 22460
•Motor: 15HP, 230/460V, 3PH
•Spindle Hole Diameter: 4-1/8
•Spindle Speeds: (12) 35-1250 RPM
•Spindle Type: D1-8
•Swing: 22
•Swing over crosslide: 12-1/2
•Swing over gap: 32
•Tailstock Taper: 5MT
•Weight: 6380 lbs
Description:
•Heavy ribbed cast bed and base
•Hardened and precision ground extra wide bedways
•Forced lubrication to the headstock carriage and bedways
•Electric brake
•Chuck guard with interlock
•Diametral and module thread capability
•Inch/Metric threading
•Removable gap
•Feed reversing on the apron
•T-Slotted compound
•Dual headstock and apron spindle control levers
•Full length splash guard
•Two speed tailstock
•1 Year Warranty on Parts & Labor - 6 Months on all Electrical
•F.O.B. OKLAHOMA CITY, OK
•Standard Equipment:•Thread dial, carriage stop
•Steady rest with rollers, follow rest
•Coolant system, Halogen work light
•12" 3-Jaw chuck
•Taper attachment
•4 Way rapid traverse
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 6380.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
GH-1440ZX Lathe with ACU-RITE 300S DRO
Item #: PY60321301
Manufacturer: Jet
Mfg #: 321301
Technical Specifications:
•Brand Name: Jet
•Center Taper: 7MT (5MT)
•Cross slide travel: 9
•Description: GH-1440ZX Lathe with Acu-Rite 300S DRO
•Distance Between Centers: 60
•Floor Space Required: 96 x 44 x 66
•Inch Pitch Threads: (61) 1-5/8-72 TPI
•Metric Pitch Threads: (24) .05-20mm
•Model Number: 321301
•Motor: 7-1/2HP, 230/460V, Prewired 230V, 3PH
•Spindle Hole Diameter: 3-1/8
•Spindle Speeds: (12) 42-1800 RPM
•Spindle Type: D1-8
•Swing: 14
•Swing over crosslide: 7-5/8
•Swing over gap: 18
•Tailstock Taper: 4MT
•Top Slide Travel: 5-1/8
•Weight: 5167 lbs
Description:
•The ZX-Series Large Spindle Bore Lathe provides power, precision, efficiency and reliability to your metal shop
•A one piece cast iron base absorbs vibrations during operation to allow heavier cuts and ensure accuracy, while the Universal Gearbox eliminates the need to change gears
•3-1/8" bore spindle is supported by two tapered and one ball bearings
•Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
•One piece cast iron base absorbs vibration allowing heavier cuts
•High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
•Siemens Electrics
•Front Removable Chip Tray
•Safety Holder for Chuck Key
•Chuck Key must be in Holder for lathe to operate
•Large easy to use foot brake
•Chrome molybdenum headstock gears are hardened, ground and shaved
•Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
•2 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 5167.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21x80 Geared Head Lathe with Collet Closer
Item #: RB21892631
Manufacturer: Jet
Mfg #: 892631
Technical Specifications:
•Brand Name: Jet
•Center Taper: 7MT
•Cross slide travel: 10-2/3
•Distance Between Centers: 80
•Floor Space Required: 139 x 44 x 68
•Model Number: EGH-2180
•Motor: 12-1/2 HP, 230/460V, 3PH
•Spindle Hole Diameter: 3-1/8
•Spindle Speeds: 20-1600
•Spindle Type: D1-8
•Swing: 21
•Swing over crosslide: 14
•Swing over gap: 31-1/9
•Tailstock Taper: 5MT
•Trade Name: Elite
•Weight: 6,613 lbs
Description:
•Fully lit with CNC-style lighting, the enclosed full length splash guard
•Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004"
•Hardened and ground gears in headstock
•Turcite-B coating between bed and carriage
•One-shot lubrication in carriage
•Overload clutch at fee shaft prevents the carriage from crashing into the chuck
•Shear pin in the lead screw disengages the feed when overloading, preventing damage to the apron and headstock
•Hardened and ground bed ways
•Front facing chip pan
•Certified Meehanite castings
•Collet closer included installed
•CSA/UL electrics
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 6613.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Elite 5C Lever Type Collet Closer For EGH-1740 and EGH-1760 Lathes
Item #: RB21892156
Manufacturer: Jet
Mfg #: 892156
Technical Specifications:
•Brand Name: Jet
Description:
Shipping Info:
•Actual Weight - 50.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
GHB-1340AWith Taper Attachment
Item #: PY60321119
Manufacturer: Jet
Mfg #: 321119
Technical Specifications:
•Brand Name: Jet
•Carriage Travel (in.): 35
•Compound Slide Travel (in.): 2-11/16
•Cross slide travel: 6-5/16
•Description: GHB-1340A-TAK Lathe with Taper
•Distance Between Centers: 40
•Follow Rest Capacity (in.): 2-3/8
•Inch Pitch Threads: (38) 3-1/2-80 TPI
•Length of Gap (in.): 8
•Max. Tool Size (in.): 5/8 x 5/8
•Metric Pitch Threads: (23) .45-10
•Model Number: GHB-1340A
•Motor: 2HP, 230V, 1PH
•Overall Dimensions: 79 x 28-1/2 x 30
•Range of Cross Feeds (IPR): .0006 - .0130
•Range of Longitudinal Feeds (IPR): .0018 - .0374
•Spindle Bore (in.): 1-3/8
•Spindle Speeds: (8) 70-2000 RPM
•Spindle Type: D1-4
•Steady Rest Capacity (in.): 2-3/4
•Style: Bench - Geared Head
•Swing: 13
•Swing over crosslide: 7-25/32
•Swing over gap: 18-3/4
•Tailstock Spindle Travel (in.): 3-3/4
•Tailstock Taper: 3MT
•Weight: 1154 lbs
•Width of Bed (in.): 7-3/8
Description:
•JET geared head bench lathes feature an enclosed gearbox for smooth, quiet operation
•Precision roller bearings support the hardened and ground spindle resulting in tight tolerances
•One of the most popular JET lathes now comes with an enclosed gear box
•Enclosed gear box design provides smooth, quiet operation
•Fast, easy speed changes
•Hardened and ground gears are featured in the headstock and gearbox
•D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
•Headstock is constantly oiled during operation
•Gear box gives wide inch threading and feed capabilities with no gear changes
•V-way bed design is induction hardened and ground
•Gap bed section provided for larger diameter work
•Independent leadscrew and feed rod
•2 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 1285.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12" Faceplate D1-6 For Elite 17" Geared Head Lathes
Item #: RB21892155
Manufacturer: Jet
Mfg #: 892155
Technical Specifications:
•Brand Name: Jet
Description:
Shipping Info:
•Actual Weight - 25.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
224160A 22" x 160" Gear Head Toolroom Lathe; (12) 35-1250 RPM Spindle Speeds; D1-8 Spindle; Spindle Hole Dia. 4-1/8";15HP 220/440volt/3ph
Item #: PY80224160A
Manufacturer: Summit
Mfg #: 224160A
Technical Specifications:
•Brand Name: Summit
•Cross slide travel: 14-3/4
•Distance Between Centers: 160
•Inch Pitch Threads: (36) 2-28 TPI
•Metric Pitch Threads: (65) .08-14mm
•Model Number: 224160
•Motor: 15HP, 230/460V, 3PH
•Spindle Hole Diameter: 4-1/8
•Spindle Speeds: (12) 35-1250 RPM
•Spindle Type: D1-8
•Swing: 22
•Swing over crosslide: 12-1/2
•Swing over gap: 32
•Tailstock Taper: 5MT
•Weight: 10670 lbs
Description:
•Heavy ribbed cast bed and base
•Hardened and precision ground extra wide bedways
•Forced lubrication to the headstock carriage and bedways
•Electric brake
•Chuck guard with interlock
•Diametral and module thread capability
•Inch/Metric threading
•Removable gap
•Feed reversing on the apron
•T-Slotted compound
•Dual headstock and apron spindle control levers
•Full length splash guard
•Two speed tailstock
•1 Year Warranty on Parts & Labor - 6 Months on all Electrical
•F.O.B. OKLAHOMA CITY, OK
•Standard Equipment:•Thread dial, carriage stop
•Steady rest with rollers, follow rest
•Coolant system, Halogen work light
•12" 3-Jaw chuck
•Taper attachment
•4 Way rapid traverse
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 10670.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Geared Head Lathe - #20460 20-1/4'' Swing; 60'' Between Centers; 10HP Motor
Item #: PY8020460
Manufacturer: Summit
Mfg #: 20460
Technical Specifications:
•Brand Name: Summit
•Center Taper: 6MT
•Cross slide travel: 11-3/8
•Distance Between Centers: 60
•Inch Pitch Threads: (64) 1/4-60 TPI
•Metric Pitch Threads: (64) .5-120mm
•Model Number: 20460
•Motor: 10HP, 220V, 3PH
•Spindle Hole Diameter: 4-1/8
•Spindle Speeds: (15) 11.5-1400 RPM
•Spindle Type: D1-8
•Swing: 20-1/4
•Swing over crosslide: 11-7/8
•Swing over gap: 27-5/8
•Tailstock Taper: 5MT
•Weight: 8600 lbs
Description:
•Removable gap
•Inch/metric threads
•Conveniently located controls
•Feed reversing at the apron
•4-way rapid traverse
•Single lever control for feeds and rapids
•Full length splash guard
•2 Speed tailstock
•1 Year Warranty Parts & Labor, 6 Months on all Electrical
•F.O.B. OKLAHOMA CITY, OK
•Standard Equipment:•Thread dial
•Standard steady rest with roller tips
•Extra capacity steady rest with roller tips
•Follow rest
•Coolant system
•Taper attachment
•3-Jaw chuck
•Carriage stop
•Work light
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 8600.0000
•Dimensions - Height: 67.0 Length: 134. Width: 48.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Geared Head Lathe - #D1740G4 17'' Swing; 40'' Between Centers; 7.5HP; 440V Motor 3PH
Item #: RA601740G4
Manufacturer: Acer
Mfg #: D1740G4
Technical Specifications:
•Brand Name: Acer
•Center Taper: 3MT
•Cross slide travel: 8-5/8
•Distance Between Centers: 40
•Inch Pitch Threads: (36) 4-56 TPI
•Metric Pitch Threads: (22) .5-7mm
•Model Number: 1740G4
•Motor: 7.5HP, 460V
•Spindle Hole Diameter: 2-5/16
•Spindle Speeds: (12) 50-1800 RPM
•Spindle Type: D1-6
•Swing: 17
•Swing over crosslide: 9-5/8
•Swing over gap: 26
•Tailstock Taper: 4MT
•Weight: 3500 lbs
Description:
•Full high tensile "Meehanite" cast iron (FC30) bed and headstock Cementation and precisely ground (SCM21) gears provide smooth and quiet running Hardened & ground bed way to HRC55 Quick change inch and metric gearbox Pumpfeed lubrication and oil bathed system in headstock Induction hardened and ground cross slideways Saddle is coated with Turcite-B to provide wear resistance Overload protection device in the apron Spindle supported by (3) FAG bearings, (2) taper roller and (1) plain roller bearing
•Includes: Gap bed, 10 D1-6 / 12 D1-8 3-jaw chuck, Built in coolant system, 12 4-jaw adapter plate, 9 3-jaw adapter plate, 14 face plate, Full length splash guard, Steady rest, Foot brake, Halogen worklight, Tool box with tools, instructions and parts manual.
•F.O.B. ORANGE, CA
•1 Year Warranty
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 3500.0000
•An additional $250.00 in-bound freight charge will be added for each item ordered to the total outbound freight charge.
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6" x 18" High Precision Electronic Variable Speed Toolroom Lathe With an A/C Inverter Drive Spindle
Item #: RA65CTS618EVS
Manufacturer: Kent
Mfg #: CTS618EVS
Technical Specifications:
•Brand Name: Kent
•Cross slide travel: 6
•Distance Between Centers: 18
•Inch Pitch Threads: (36) 11-108 TPI
•Metric Pitch Threads: (36) .275-2.7mm
•Model Number: CTL-618EVS
•Motor: 3HP, 230V, 3PH
•Spindle Hole Diameter: 1-1/16
•Spindle Speeds: 0-4000 RPM (infinitely variable)
•Spindle Type: 5C
•Swing: 11
•Swing over crosslide: 6
•Swing over gap: 11
•Tailstock Taper: 2MT
•Weight: 2300 lbs
Description:
•AC-Frequency Inverter Drive Main Spindle
•Inch and Metric Threading Capability
•Kick-Out Mechanism for setting position stops during threading operations
•Builty in 5C Collet Closer with 1-1/16" thru collet capacity
•Collet holders with swing-out mechanism in base cabinet
•Variable electric feeds for longitudinal and cross travels
•Quick engage/release mechanism slide compound
•1 Year Warranty
•F.O.B. TUSTIN, CA
•Standard Equipment:•6" 3-Jaw chuck
•4° Adapter Plate to fit 3 or 4 jaw chuck
•5C Collet closer
•Collet holder in cabinet
•Coolant system
•Halogen work light
•Leveling bolts/pads
•One-shot lubrication
•Inch/Metric threading
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 2300.0000
•Shipping Weight - 2300.0000
•Dimensions - Height: 68.0 Length: 85.0 Width: 36.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It