4" OAL - AlTiN CBD-Ball Nose HP End Mill-4 FL

Item #: DD25LB304032
Manufacturer: Premier HP
Mfg #:

Technical Specifications:
•Brand Name: Premier HP •Coating: AlTiN •Flute Length: 1/2 •Length Below Shank: 1-1/2 •Material: Solid Carbide •Neck Diameter: .492 •Number of Flutes: 4 •Overall Length: 4-1/4 •Shank Diameter: 1/2 •Size: 1/2 •Style: Long Reach •Type: Ball End

Description:
•AlTiN coated carbide ball end •Carbide 4 Flute 30 Helix Long Reach Ball end Mills with AlTiN Coating •O.D. Tolerance: -.0005" -.0015" •Shank tolerance: 0 -.0003" •Radius tolerance: .001" •Can be widely used for milling from raw materials, pre-hardened steels, and to hardened steels •Deep slotting milling is possible by reduced neck •For copy-milling machines •Longevity is more than five times as long as non-coated end mill •Through AlTiN coating endurance when dry-milling

Shipping Info:
•Actual Weight - .4000 •Dimensions - Height: .700 Length: 4.70 Width: .700

$147.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 TuffCut DM 2 Fl Ball Nose ALtima 52 Coated Center Cutting End Mill

Item #: DD1515674
Manufacturer: M A Ford
Mfg #: 15650000A

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® 52 •Flute Length: 1/2 •List No.: 156 •Material: Carbide •Model Number: 15650000A •Number of Flutes: 2 •Overall Length: 4 •Reduced Neck Length: 1/2 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: Tuff Cut® DM •Type: Fractional

Description:
•Designed for high productivity milling of hard and difficult to cut materials Rc 45-60 •Coated with ALtima® 52 for materials Rc 52 and above •12° Helix, ball end

Shipping Info:
•Actual Weight - .3169 •Dimensions - Height: .500 Length: 4.00 Width: .500

$243.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4" Dia. - 4" OAL - Carbide - Ball End HP End Mill-4 FL

Item #: TP374047500BN
Manufacturer: OSG USA, Inc.
Mfg #: 404-7500-B

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: Bright •Decimal Equivalent: .7500 •Flute Length: 1-1/2 •Helix Angle: 30 Degree •List No.: 404BN •Material: Carbide •Number of Flutes: 4 •Overall Length: 4 •Shank Diameter: 3/4 •Shank Type: Round Shank •Size: 3/4 •Style: Ball •Type: Fractional Ball End

Description:
•Micrograin carbide end mill •Regular length •Ball end •4 Flute

Shipping Info:
•Actual Weight - .7950 •Dimensions - Height: .850 Length: 2.60 Width: 1.00

$174.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

21/64" Dia. - 2-1/2" OAL - Carbide - Ball End HP End Mill-4 FL

Item #: TP374043281BN11
Manufacturer: OSG USA, Inc.
Mfg #: 404-3281-B

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: TiALN •Decimal Equivalent: .3281 •Flute Length: 7/8 •Helix Angle: 30 Degree •List No.: 404BN •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 3/8 •Shank Type: Round Shank •Size: 21/64 •Style: Ball •Type: Ball End

Description:
•OSG List No. 404BN

Shipping Info:
•Actual Weight - .1200 •Dimensions - Height: .500 Length: 3.35 Width: .600

$56.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

9/32" Dia. - 2-1/2" OAL - Carbide - Ball End HP End Mill-4 FL

Item #: TP374042812BN
Manufacturer: OSG USA, Inc.
Mfg #: 404-2812-B

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: Bright •Decimal Equivalent: .2812 •Flute Length: 3/4 •Helix Angle: 30 Degree •List No.: 404BN •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 5/16 •Shank Type: Round Shank •Size: 9/32 •Style: Ball •Type: Fractional Ball End

Description:
•Micrograin carbide end mill •Regular length •Ball end •4 Flute

Shipping Info:
•Actual Weight - .0950 •Dimensions - Height: .450 Length: 3.45 Width: .550

$31.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/32" Dia. - 2-1/2" OAL - Solid Carbide - Ball End HP End Mill-2 FL

Item #: TP4836100311
Manufacturer: OSG USA, Inc.
Mfg #: 36100311

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Decimal Equivalent: .0938 •Flute Length: 3/32 •Helix Angle: 30 Degree •List No.: 3610 •Material: Carbide •Number of Flutes: 2 •Overall Length: 2-1/2 •Shank Diameter: 1/4 •Shank Type: Round Shank •Size: 3/32 •Style: Ball •Trade Name: EXOCARB® WXL® •Type: Ball End

Description:
•EXOCARB WXL coated carbide end mills •2 Flute Ball Nose •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: For Profile Milling in non ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .0700 •Dimensions - Height: .450 Length: 3.20 Width: .550

$70.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 TuffCut XR 4 Flute Carbide End Mill Ball Nose

Item #: DD1618049
Manufacturer: M A Ford
Mfg #: 17937510A

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® •Flute Length: 7/8 •List No.: 179 •Material: Carbide •Model Number: 17937510A •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 3/8 •Size: 3/8 •Trade Name: Tuff Cut® XR •Type: Fractional

Description:
•Center cutting •35°/38° Helix

Shipping Info:
•Actual Weight - .1261 •Dimensions - Height: .500 Length: 2.50 Width: .500

$76.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8x3/8x7/8x2-1/2 4 Flute Ball Nose TuffCut® XT HP End Mill ALtima® Blaze Coated

Item #: DD1627928
Manufacturer: M A Ford
Mfg #: 27937510B

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® Blaze •Flute Length: 7/8 •List No.: 279 •Material: Carbide •Model Number: 27937510B •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 3/8 •Size: 3/8 •Trade Name: TuffCut® XT •Type: Fractional

Description:
•Variable 35°/38° helix •Center cutting •Higher feeds over similar end mills •Reduced vibration harmonics •Improved part finishes •Maintains cutting edge strength & sharpness for improved tool life •Slotting at 1X diameter deep •State-of-the-art ALtima® Blaze coating for superior tool life and higher metal removal rates •Designed for specific applications in steels, stainless steels, special alloys, cast iron, titanium inconel, and high temp alloys •M.A. Ford List #279

Shipping Info:
•Actual Weight - .1912 •Dimensions - Height: .500 Length: 2.50 Width: .500

$79.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 5/8 x 6 w/4-1/4 Reach Ball Nose 3 Flute Carbide M223N Streaker End Mill-ZrN

Item #: DD4061183
Manufacturer: Imco
Mfg #: 61183

Technical Specifications:
•Brand Name: Imco •Coating: ZrN •Flute Length: 5/8 •Material: Carbide •Number of Flutes: 3 •Overall Length: 6 •Radius: Ball Nose •Reach: 4-1/4 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: M223N Streaker

Description:
•Designed for machining aluminum •ZrN coated for maximum tool life

Shipping Info:
•Actual Weight - .6000 •Dimensions - Height: .750 Length: 6.50 Width: .750

$211.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

4mm TuffCut DM 2 Fl Ball Nose ALtima 52 Coated Center Cutting End Mill

Item #: DD1515678
Manufacturer: M A Ford
Mfg #: 15615751A

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® 52 •Flute Length: 4mm •List No.: 156 •Material: Carbide •Model Number: 15615751A •Number of Flutes: 2 •Overall Length: 75mm •Reduced Neck Length: 12mm •Shank Diameter: 6mm •Size: 4mm •Trade Name: Tuff Cut® DM •Type: Metric

Description:
•Designed for high productivity milling of hard and difficult to cut materials Rc 45-60 •Coated with ALtima® 52 for materials Rc 52 and above •12° Helix, ball end

Shipping Info:
•Actual Weight - .0178 •Dimensions - Height: .310 Length: 3.00 Width: .310

$93.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12mm Dia. - 110mm OAL - Carbide - Ball End HP End Mill-2 FL

Item #: TP483106660
Manufacturer: OSG USA, Inc.
Mfg #: 3106660

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Decimal Equivalent: .4724 •Flute Length: 18.0mm •Helix Angle: 30 Degree •List No.: 3710 •Material: Carbide •Number of Flutes: 2 •Overall Length: 110mm •Shank Diameter: 12mm •Shank Type: Round Shank •Size: 12.0mm •Style: Ball •Trade Name: EXOCARB® WXL® •Type: Ball End

Description:
•EXOCARB WXL coated carbide end mills •2 Flute Ball Nose •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: For Profile Milling in non-ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .3850 •Dimensions - Height: .650 Length: 4.40 Width: .750

$145.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4" Dia. - 4" OAL - Carbide - Ball End HP End Mill-2 FL

Item #: TP4820100900
Manufacturer: OSG USA, Inc.
Mfg #: 20100900

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: Bright •Decimal Equivalent: .7500 •Flute Length: 1-5/8 •Helix Angle: 60 Degree •List No.: 2010 •Material: Carbide •Number of Flutes: 2 •Overall Length: 4 •Shank Diameter: 3/4 •Shank Type: Round Shank •Size: 3/4 •Style: Ball •Trade Name: EXOCARB®-AERO BLIZZARD® •Type: 2 Flute Ball Nose-List 2010

Description:
•Carbide end mill for aluminum, aluminum alloys and copper alloys •Regular length •2 Flute •Ball end •Bright finish

Shipping Info:
•Actual Weight - .5000

$242.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16x5/16x13/16x2-1/2 Ball Nose 4FL Carbide End Mill-Round Shank-TiAlN

Item #: WK405825670
Manufacturer: Widia
Mfg #: 5825670

Technical Specifications:
•Brand Name: Widia •Coating: TiAlN •Flute Length: 13/16 •List No.: I4B •Material: Carbide •Model Number: I4B0312T081R •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: Ball Nose •Shank Diameter: 5/16 •Shank Type: Round •Size: 5/16 •Trade Name: GP •Type: Inch

Description:

Shipping Info:
•Actual Weight - .1323 •Dimensions - Height: .320 Length: 3.16 Width: .350

$34.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.4mm Dia. - 40mm OAL - Carbide - Ball End HP End Mill-2 FL

Item #: TP483105040
Manufacturer: OSG USA, Inc.
Mfg #: 3105040

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Decimal Equivalent: .0157 •Flute Length: 0.8mm •Helix Angle: 30 Degree •List No.: 3710 •Material: Carbide •Number of Flutes: 2 •Overall Length: 40mm •Shank Diameter: 4mm •Shank Type: Round Shank •Size: 0.4mm •Style: Ball •Trade Name: EXOCARB® WXL® •Type: Ball End

Description:
•EXOCARB WXL coated carbide end mills •2 Flute Ball Nose •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: For Profile Milling in non-ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .0250 •Dimensions - Height: .400 Length: 2.60 Width: .600

$55.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 TuffCut DM 2 Fl Ball Nose ALtima 52 Coated Center Cutting End Mill

Item #: DD1515662
Manufacturer: M A Ford
Mfg #: 15625000A

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® 52 •Flute Length: 1/4 •List No.: 156 •Material: Carbide •Model Number: 15625000A •Number of Flutes: 2 •Overall Length: 3 •Reduced Neck Length: 1/4 •Shank Diameter: 1/4 •Size: 1/4 •Trade Name: Tuff Cut® DM •Type: Fractional

Description:
•Designed for high productivity milling of hard and difficult to cut materials Rc 45-60 •Coated with ALtima® 52 for materials Rc 52 and above •12° Helix, ball end

Shipping Info:
•Actual Weight - .0613 •Dimensions - Height: .310 Length: 3.00 Width: .310

$95.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 x 1/4 x 3/8 x 3 w/1-3/8 Reach Ball Nose 3 Flute Carbide M223N Streaker End Mill-ZrN

Item #: DD4061141
Manufacturer: Imco
Mfg #: 61141

Technical Specifications:
•Brand Name: Imco •Coating: ZrN •Flute Length: 3/8 •Material: Carbide •Number of Flutes: 3 •Overall Length: 3 •Radius: Ball Nose •Reach: 1-3/8 •Shank Diameter: 1/4 •Size: 1/4 •Trade Name: M223N Streaker

Description:
•Designed for machining aluminum •ZrN coated for maximum tool life

Shipping Info:
•Actual Weight - .0744

$88.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

2mm Dia. - 57mm OAL - AlTiN CBD-30° Helix-Ball Nose HP End Mill-2 FL

Item #: GE45MMBM02015X
Manufacturer: Micro 100
Mfg #: MMBM-020-1

Technical Specifications:
•Brand Name: Micro 100 •Coating: AlTiN •Flute Length: 2mm •Material: Solid Carbide •Neck Diameter: 1.9mm •Number of Flutes: 2 •Overall Length: 57mm •Reduced Neck Length: 15mm •Shank Diameter: 6mm •Size: 2mm •Style: Round Shank •Type: 30° Helix-Ball Nose

Description:
•Mold making ball nose end mill •2 Flute - center cutting 30 degree helix •Mold & die: M-Plus finishing

Shipping Info:
•Actual Weight - .0400 •Dimensions - Height: .500 Length: 2.90 Width: .500

$51.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1mm Dia. - 55mm OAL - Solid Carbide - Ball End HP End Mill-2 FL

Item #: TP483111120
Manufacturer: OSG USA, Inc.
Mfg #: 3111120

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Decimal Equivalent: .0394 •Flute Length: 0.8mm •Helix Angle: 30 Degree •List No.: 3790 •Material: Carbide •Neck Diameter: 0.95mm •Number of Flutes: 2 •Overall Length: 55mm •Reduced Neck Length: 20mm •Shank Diameter: 4mm •Shank Type: Round Shank •Size: 1mm •Style: Ball •Trade Name: EXOCARB® WXL® •Type: Ball End

Description:
•EXOCARB WXL coated carbide end mills •2 Flute rib processing ball nose •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: For rib Processing in non-ferrous and hardened steels

Shipping Info:
•Actual Weight - .0200 •Dimensions - Height: .450 Length: 2.60 Width: .450

$122.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GMF15032 1/2 DIA 2FL HP BN EM

Item #: YG34GMF15032
Manufacturer: YG-1 Cutting Tools
Mfg #: GMF15032

Technical Specifications:
•Brand Name: YG-1 Cutting Tools

Description:

Shipping Info:

$161.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12mm Dia. - 76mm OAL - Carbide - Ball End HP End Mill-4 FL

Item #: TP374044724BN
Manufacturer: OSG USA, Inc.
Mfg #: 404-4724-B

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: Bright •Decimal Equivalent: .4724 •Flute Length: 25mm •Helix Angle: 30 Degree •List No.: 404BN •Material: Carbide •Number of Flutes: 4 •Overall Length: 76mm •Shank Diameter: 12mm •Shank Type: Round Shank •Size: 12mm •Style: Ball •Type: Metric Ball End

Description:
•Micrograin carbide end mill •Regular length •Ball end •4 Flute

Shipping Info:
•Actual Weight - .2400 •Dimensions - Height: .650 Length: 3.40 Width: .750

$69.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It